|
 The DMS F300 range of fire resistant roller shutter doors are designed to protect personnel and property from fire. Available in 1.5, 2.0 or 4.0 hour protection ratings, they can be operated in a number of ways ranging from a simple mechanical release mechanism to full electric operation interlocked with the fire alarm system.
All fire resistant doors are LPCB compliant and are supplied with canopy, smoke seal and heavy duty bottom rail as standard. Although galvanised finish is standard, we also offer the option of powder coat finish in any RAL colour of your choice.
Unfortunately, due to the nature and design of these products, we are unable to supply this model of door with perforated or punched lath curtain.
Typical applications range from small kiosks or parts counters to large internally fixed doors with a maximum size of 7000mm x 7000mm.
Please contact us for further details of suitable applications, options and means of operation.
Specifications:
Barrel
Constructed from mild steel tube with Helically wound counter balance springs mounted on mild steel bright shaft, with mild steel bearing blocks at each end incorporating high speed bearings. Tube and shaft size are dependent upon shutter size.
CE Marking
All electrically operated shutters are CE marked to comply with the Health and Safety Machinery At Work Directive.
Operation
Operation is by one of the following - Spring Assisted, Hand-Chain, or Electric Motor. Connected to a Fuseable Link.
Electrical Operation
By means of 1/2 - 2 H.P. geared motor complete with rotary limits and emergency hand mechanism. 3 push button control as standard.
Electrical Supply
240Volt 1 phase, or 415 Volt 3 phase (additional information available on request).
Curtain
Constructed from 75mm wide curved interlocking galvanised steel lath with steel endlocks and galvanised T section bottom rail.
Side Guides
Constructed from 3mm x 63mm galvanised channel for both drop bar and curtain. Bolted to a continuous 75mm x 50mm mild steel angle.
Coil Casing
To suit end plate dependent upon size from galvanised 0.9mm sheet. Slotted for expansion to suit M10 fixings.
Finish Options
As standard galvanised curtains, side guides and coil casing, with black painted angles and end plates. However, to compliment the aesthetics of buildings, this product can be powder coated to any BS or Ral colour.
Optional Extras
- Electrical Auto-Reset
- Wiring into fire alarm
- Audio Visual Displays
- Solenoid Release
- Quartzoid Bulb
- Controlled Descent Unit
|
NEW! 
1887 Leek Road Stoke on Trent, ST2 7AQ
Telephone: 01782 637 255 - Fax: 01782 610316
Email: service@dmsdoors.co.uk